Troubleshooting for HDL-GXW series
http://www.iodata.com/
 
How to use the Online Manual with Macintosh.

This section describes how to use the Online Manual with Macintosh.

 
 
1

Start up the Web browser, enter the following address and press the [Enter] key.

http://IP address of this product/

Example when the IP address of this product is [192.168.0.200]

>

"IP address of this product" if DHCP server is available.
Check the IP address assigned to this product by the DHCP server.

In some cases the DHCP server of your broadband router or other devices may hold a record of the IP address that it has assigned to this product. For further details, refer to the manual of the equipment used as the DHCP server.

>

"IP address of this product" if DHCP server is unavailable.
Enter the IP address that was set up for this product.

Forgetting the IP address of this product.

If a Windows computer exists in the network, look up the IP address from the Windows computer.
[Finding out the IP address set up for this product.]

If only Mac OS computer are used, the IP address cannot be looked up.

After disconnecting the LAN cable from this product, restore the IP address of this product to factory default (192.168.0.200).

See [Setting Factory default].

After restoring the IP address to factory default, reset the IP address of this product from the beginning.
[Determine the IP address of this product]

2

After a while, the screen shown below will be displayed.

Click the [Online Manual] button to see the Online Manual.

 
Setup screen is not displayed.
See [Troubleshooting]

topTop of Page
Copyright (C) 2007 I-O DATA DEVICE, INC. All Rights Reserved.